Features

• Compact heads

• High responsive rack & pinion Z-axis structure reduces tact time to 0.26 sec/chip under optimal condition.
• The simple structure of the rotational axis’ Direct Drive Theta mechanism has improved reliability and made the system free of A/S requirement.

• None contact of centering system

• Can handle up to 1005(clips)~32mm QPFs.
• High accuracy detection through collecting information on pick-up posture using Line CCD (Pixel size: 0.017mm) and gray scale image processing.
• Diversified component identifying system, such as BOB (Block On Body) and BOL (Block On Lead) inspection.
• None contact centering system had minimized component damage to zero level.
• High speed / high accuracy calibration of positioning and angle slip of picked component.
• Mounting system optimized to reduce component loss rate and to promote mounting reliability.

• Image sensing vision unit (CP 33LV?)

• BGA (Ball inspection: 42? 42mm, 1.0mm pitch), connector
• QFP: 42? 42mm, 0.5mm pitch
• QFP: 32? 32mm, 0.3mm pitch (Option)
• Easy to setup at the optimal position on the feeder base
• Image processing time for vision recognition: 1.3 sec.
• High precision recognition realized by carrying out 256-stage gray scale image processing.

BODY

• Slim type tape feeder

• Pneumatic cylinder operated system, capable of accommodating maximum 104 pieces of 8mm tape feeder.

• Feeder floating detector

• If the photo sensor detects floating of the Tape Feeder, operation of the machine is stopped.

• Dual CPU structure

• Data can be edited during work by operating the data processor and system operation.

• Safety interlock function

• In case the front or rear acrylic cover is opened, or if air pressure is low, the machine is stopped to protect operators and equipment.

• Auto nozzle changer(ANC)

• Locate in the optimal position on the tape feeder base.
• Up to 10 types of nozzle pockets makes this applicable for a variety of shapes and of components.

SOFTWARE

• Off-line program (Option)

• CAD interface: CADSTAR, MENTOR, ZUKEN, GRAVER, ASCII data and others.
• Digitizer interface: Summer Sketch III-series, WACOM II-series.
• Mounting sequence, feeder arrangement optimizer
• Lone balancing program

• Convenient work environment based on WINDOWS 95.

• User friendly Windows 95 based software.
• Hardware is composed of a 14?VGA color monitor, a 3.5?FDD, a keyboard, a HDD (1.2GB) and a mouse.
• Errors can be checked easily by displaying error on screen.
• Workability and convenience improved graphic screen.
• Productivity optimized through auto programming.
• Fast S/W upgrade (using communication networks)
• Production management and line control made easy by mounting all data into data base.

• The industries first remote service system.

• Diagnose the machine and take remedial action via public network.
• Immediate upgrading of S/W without the need of separated installation.

Specification