HI-GRADE #102-SC SOLVENT CLEANER
Description
HI-GRADE #I02-SC SOLVENT CLEANER is
designed for a variety of uses which includes removing flux residues from printed circuit
boards and removing acrylic based conformal coatings. This solvent can also be used
effectively for cleaning machinery or parts to remove grease, oil, dirt and contamination.
The #102-SC does not contain any CFC or HCFC solvents, and is not contained on the list of
ozone depleting chemicals. Use of this solvent does not violate the mandates set forth in
the clean air act or the Montreal Protocol.
Benefits
- Effectively removes residues from rosin and synthetically
activated soldering fluxes. Remove acrylic conformal coating. Also effective at removing
oils and grease.
- Does not contain solvents considered as ozone depleting.
- Capable of absorbing large amounts of contaminants yet still
provide excellent cleaning.
- Evaporates completely leaving no residual material.
Application
The #102-SC SOLVENT CLFANER can be used In
vapour degreasers, ultrasonic cleaners or used at room temperature by applying with a
brush or for immersion cleaning. Drying of assemblies or parts can be aided by the use of
warm air, slow-off, or air knife equipment. This cleaner should not be used with parts
made from nylon, polycarbonate, polypropylene or ASS plastic. Process tanks should be 316
stainless steel, cast iron or lined with Ryton, Teflon or Kynar.
Physical Properties
Specific Gravity |
: 1.548 @ 60 deg. F (15.5 deg. C) |
Pounds per gallon |
: 12.90 |
Distillation Range |
: 165 deg. F -194 deg. F (14-90 deg. C) |
Flash Point |
: None |
Appearance |
: Clear liquid |
Packing
23 liters or 6 US gallon
per container
209 liters or 55 US gallon per container
Safety And Precautions
Use wih adequate ventilation. Always wear
safety glasses and protective clothing. See MSDS for full details.
